Monday, December 30, 2019

Laboratorio de Analisis Argentina Essay examples - 1437 Words

Due to increasing competition in the field of medical testing it has become prudent for Laboratorio De Analisis Argentina (LAA) to evaluate its process and identify strengths and weaknesses to improve the operations of their laboratories. An in-depth investigation into day-to-day, step-by-step breakdown of activities has uncovered where, and how LAA can achieve efficient operations. From the original collection of samples to the final step of communicating the test results to the patients, LAA has shown that they have created a process with numerous factors to success as well as room for improvement. The following is a flow chart representative of the steps of the process and the reliance each step has to other steps: While not†¦show more content†¦If the company is adamant at meeting the 5,000 sample a day mark and removing demand variability it may be worthwhile to look into holding off on samples arriving later in the day as to have immediate work for testers and the la tter steps at the beginning of the next day. Samples from the second 8-hour shift of a certain day that are processed during the first 8-hour shift of the following day will still meet the objective of communicating results within the 24-hour limit. This technique could also potentially decrease standard deviation as it tries to evenly control the sample flow and demand variability in the daily process. Routine delivery times for satellite and external labs could also lead to more consistency within the process. The table below represents the average samples processed per hour and per step, based off the minimum, average, and maximum samples processed on exhibit 4. Separation numbers are half of the other process’s sample numbers because only 50% of samples go to separation. Minimum Demand (2,353) (avg. sample/hour) Average Demand (4,989) (avg. sample/hour) Maximum Demand (7,250) (avg. sample/hour) Processing 147 312 453 Separation 74 156 227 Distribution 147 312 453 Testing 147 312 453 Storage 147 312 453Show MoreRelatedLaboratorio De Analisis Argentina1973 Words   |  8 Pagesï » ¿Process Management Case: Laboratorio de Analisis Argentina 1. What are the key success factors for LAA? The key success factors for LAA are as follows: * Management’s belief in achieving and maintaining high-quality service based on fast turnaround times and accurate testing * Management’s recognition that there are flaws in LAA’s current processes and their willingness to fix the problems by doing a thorough analysis of the internal operations * Locally owned and operated

Sunday, December 22, 2019

Education Assistants Role in Education Essay - 1556 Words

Significant reforms have been made to the education system due to the demands of a fast changing and increasingly competitive global economy. The need to provide quality education that maximizes the potential of every child and raise standards of pupil performance has increased the demand for education assistants and broadened the range of responsibilities they perform. In the past, an education assistant’s role involved preparing materials for the classroom, childcare and pastoral care. However in today’s teaching environment, an education assistant is also required to support students with special needs, implement lesson plans, assess pupil progress, manage challenging behaviours and much more. It is important to note that many of these†¦show more content†¦A lack of communication can present as a key challenge that educational assistants encounter in their position. Poorly defined job descriptions can lead to teachers and education assistants having disagree ments over individual responsibilities (Chopra French, 2004; Riggs Mueller, 2001). Successful educational assistants must take the initiative, when in doubt, to communicate and clarify with the supervising teacher and promptly resolve disputes that might occur. Clearly differentiated roles between the education assistants and teachers continue to remain an issue that is difficult to resolve as the role of an education assistant cannot be examined in isolation. It should include the examination of the interrelated and distinct roles of the teacher and special-education teachers as well in best meeting student needs (Giangreco, Suter, Jesse Doyle, 2010). At best, a successful educational assistant has to keep an open mind and remain adaptable to meet the variety of needs and demands while working with different teachers and students (Kay, 2005). Another challenge that education assistants encounter is the inability of teachers to allocate time to address issues that require urgent attention. Teachers and education assistants may only have limited time to discuss pertinent issues. A way to resolve this issue according to Tyrer, et al (2004), is toShow MoreRelatedDescribe the Differing Roles of Teaching Assistants. Compare the Similarities and Differences in Different Teaching Assistant’s Jobs, and Consider the Personal Qualities and Skills Needed by These Professionals.1390 Words   |  6 Pagesa key resource and are used very effectively in many (primary) schools.’ OFSTEDs Review of Primary Education 1994 – 1998 (1999) Teaching Assistants (TAs) have an essential role to play in the smooth and effective running of a school. They are an extra pair of eyes, ears and hands for the teacher and give support to the structure of the school. [pic] (Teaching Assistant’s Pocketbook. Dot Constable. 2005) Teaching Assistants work in Primary, Secondary and Special Needs SchoolsRead MoreThe Importance Of Nursing And Nurse Assistant907 Words   |  4 Pagesnurse aide gets paid $11.64 hourly on average. Nurse’s annual salary on average is $65,470 while a nurse assistant’s is $25,090 on average, which is an enormous difference. Therefore, the nurse assistant would have to work harder to be able to simply get to the nurses hourly pay. As it states in the article â€Å"Why do registered nurses make so much?† by the website Nursetheory.com, â€Å"The education and experience registered nurses receive makes them a valuable and limited commodity that healthcare organizationsRead MoreHealth Education And Health Care863 Words   |  4 PagesHealth education encompasses a team of many different providers in a variety of settings. It has a diverse and ever changing role in health care, communities, and schools (Glanz, 2008, p. 13). The health care team works to provide educa tion for patients and also their families. Physician Assistants play a major role in the prevention and detection of disease. With the encouragement to live a healthy lifestyle and the patient/provider discussions about decision making to improve overall health,Read MoreRole Transition and Professional Nursing1569 Words   |  7 PagesRole Transition and Professional Nursing XXXX XXX University NUR/300 MSN RN February 09, 2010 Role Transition and Professional Nursing As the student nurse transitions from the role of a nursing student to the professional level of nursing, the licensed registered nurse shall perform only those nursing activities for which the RN has been prepared through basic education and those additional skills, which are obtained through subsequent nursing educationRead MorePhysical Therapy Assistant s Help Patients Recuperate From Injury957 Words   |  4 Pages Physical therapy assistant’s help patients recuperate from injury, regain movement, cope with pain and encourage wellness by assisting a physical therapist. They assist in providing therapy for patients through exercise, massage, stretching, gait and stability training, and with the use of therapeutic modalities, such as ultrasound. They also instruct patients’ families on how they may help their loved one at home. Physical therapy assistants monitor patients during therapy and report their statusRead MoreThe African American Healthcare Gap16 54 Words   |  7 Pageswould bring about change and that is the physician. The physician knows first-hand which patients appear to be suffering as it relates to utilizing something that will undoubtedly improve their life. It compels most physician to establish leadership roles depending on their passion to making a difference for their patient’s well-being. Often times physicians find themselves being involved with institutional policy reforms and undergoing vast changes within their healthcare facility. As such, the changesRead MoreBenefits Of Being A Dental Assistant1169 Words   |  5 PagesAs a dental assistant, we require the skills to be able to interact with our dental patients to use patient education to explain procedures and recovery times, diets, daily habits, and so much more. Without an affable smile and tone, patients will not be trusting of us or of dentistry in general. Social skills in a dental office are critical. From our verbal interaction with the pat ients to the speechless cooperation with the dentists and hygienists during procedures, sociability may be the singleRead MoreMedical Administrative Assistant Field1628 Words   |  7 Pagesfunctions. All are within the perimeters of medical assisting job definition with both similar and differentiating roles. All three fields require a background or knowledge of medical practices and procedures, as well as special billing, coding and medical software. Medical billing and coding are often referred to as a single term; however, in terms of employment and specific roles they are quite different. Both are in high demand because of the ever-changing medical world. Hospitals, clinicsRead MoreTda 2.4 Equality, Diversity and Inclusion in Work with Children and Young People1458 Words   |  6 Pageschildren and young people The current legislative framework protecting the equal rights of all children and young people are stated in the United Nation’s Convention on the Rights of the Child (1989). These rights are extensive, including the right to education and the right for children and young people to have their views respected. The Children Act 1989 sets out the duty of local authorities to provide services according to the needs of all children and young people. Every Child Matters (ECM) is aRead MoreUnit 307, Outcome 1: Support Assessment for Learning1411 Words   |  6 PagesSupport assessment for learning Compare and contrast the roles of the teacher and the learning support practitioner in assessment of learners achievements In order to assess pupil’s achievements the teacher will take the main lead in doing so and the learning support practitioner will take guidance from the teacher’s assessments in order to support the pupil’s progress. In order to have a clear vision of the students ability and how they are progressing, the class teacher will monitor and assess

Saturday, December 14, 2019

Aztec Culture Free Essays

Research Paper: Aztec Culture The Aztec culture dates all the way back to the 13th century. Some say that a few Aztec people still survive, although they are not exactly â€Å"pure. † Their culture was derived from South America. We will write a custom essay sample on Aztec Culture or any similar topic only for you Order Now In this research paper the plan is to inform and explain to the teacher that the Aztec were an impressive group of people for their time period because they were so advanced in science, agriculture and were far more civilized than people from other regions had assumed during that time period. What caused the collapse of such a refined empire? Moving on to government and political systems, the Aztec people’s started off with what is called the Calpulli – the basic unit of government. Each group is made up of multiple families and these families own land together. Whoever is made the leader of the Calpulli group is in charge and responsible for all the needs of everyone in the group. They set up what is called telpochalli – school for the common citizens. Leaders of these groups collect taxes as well. Although in cities the Calpulli leader is less family based and more about the region and surroundings (Cotrill). The next section of their government goes on to the nobility and councils. People in the nobility and council held a lot of power in society but they were not automatically put in government positions. Every city had a Calpulli and each Calpulli has a leader. All of the leaders from each group made up a council, these held a lot of the power in their government system. In the early to middle 1400s there were 3 main city-states that held the most power. The 3 city-states together were called the â€Å"Triple Alliance,† which was located in Mexico Valley. Each of these had a name; there was, Tenochtitlan, Texaco, and Tlacopan. Tenochtitlan came to dominate the whole empire itself. For each council an executive council is formed within it. Four members are chosen to lead; one of these chosen members is the tlatcani – leader of the city. Finally we come to the Huey Tlatcani which means â€Å"great speaker. † This person led the city, and was worshipped as a god and also considered the emperor (Cotrill). The emperor was supported by judges, governors, hosts of other officials, and priests. Even though the emperor was given â€Å"absolute power† in some sort of form, sometimes people also had a say. Emperors were chosen in a partially democratic system, meaning they ould be removed from power at any time. Archaeologists and historians are unsure of how any certain Aztec person was chosen to get the position of Huey Tlatcani. It was not hereditary but it did have something to do with family lines. The control of the Aztec empire did not go everywhere in Mexico. Lands that the Aztec people c onquered and claimed as their own did have to pay a price of tribute to them, but still had a certain amount of freedom. The gain of land was accomplished by warriors making attacks on surrounding areas, where they also took sacrificial prisoners. Most of the time, when villages, towns or cities were captured by the Aztec, it was an incentive bringing more trade and better goods to be traded along with infrastructure. So where in history did the Aztec contribute to us? Well to start, they didn’t have twenty different ones, they had about 5. The first one of these is onions and horses and this is not technically an invention or contribution but it was introduced to them by the Spaniards. Education was not seen as a â€Å"must† or a â€Å"need† by most countries during their time, yet the Aztec people made it mandatory. Unlike in countries today there are rules and regulations to education. In some countries you can’t go to school if you are a girl, yet in others it doesn’t matter what sex you are. Black, white, poor, rich, middle class, low class, it didn’t matter to the Aztec. School was for everyone (Cotrill). Another thing introduced was popcorn, yes, popcorn. It was first used by the Aztec people for head dresses and for honoring the God of Maize and Fertility; this god is also named Tlaloc. This item was not eaten until years later and was mainly popular for Aztec use only. Foods are important in understanding cultures a second from the Aztec was chocolate. Where would you be today without it? This item was exceedingly valued by them and was used as a currency. They also demanded cacao beans which played a part in the tributes they made to their gods. A drink was made from the chocolate that the Aztec called â€Å"xocoatl† – meaning bitter water, this word was actually invented by the Aztec people themselves (Cotrill). The Aztec culture brought about chewing gum and instead of calling it gum or something of the sort they called it â€Å"chicle† which is what some Mexican vendors still all it today. Although, when the Spaniards showed up they destroyed their trading routes and the gum or â€Å"chicle† disappeared with it. The item didn’t show back up for another 350 years. Aztec people were actually good with medicine and knew some things about it. For the time period they were living in they were considered to be advan ced. One of the main things they had used for medicine was called â€Å"antispasmodic medicine† this helped to prevent muscle spasms. It could be useful during surgeries and was made from what is still growing today and that is a passion flower. The passion flower is still used as an herbal remedy which is believed to help insomnia, high blood pressure, and epilepsy. The Aztec culture was not a poor one. The Aztec were simple in clothing, but not in economy. They were very rich as a country and would have been considered a first world country. Though their culture seemed simple since they wore little and lived simple lives they were very smart, Aztec people knew of value, and of money. Cocoa beans were the main form of money, which was used the most. A single rabbit would cost 30 cocoa beans. Something common in their trading system was to trade a child, most likely a daughter, for 600 cocoa beans. This should not come as a surprise since they also made human sacrifices to honor their gods. There was another type of money used, though not as often. It was treasured by the Aztec people and was highly valued. This form of money was called â€Å"quachtli†. Quachtli is a type of cloth used to make clothes. Legends say that during the time of the Aztec 10 pieces of this cloth was enough to support an Aztec for 6 months in the big city of Tenochtitlan (Cotrill). Trade was a major source of the Aztec’s income. The biggest trading market was located in Tlatelco. The Tlatelco had a large variety of goods which made it the most accommodating for people, over 60,000 came per day to visit. Whatever you wanted or needed was found here, cloth, corn, seeds, spices, pottery, etc. Not all villagers grew crops which led to other Aztec people being able to specialize in other trades. Some of the trades included were feather workers, stone workers, lapidary, and metallurgy workers. The economy of this culture came to a slow halt as soon as the Spaniards arrived. They destroyed trading routes, cities, took control, and made rules. Fighting with the Spaniards caused the Aztec people no time to grow crops and this was the start of the downturn for their economy. A somewhat discussed subject that we’re moving forward on is the social system of the Aztec people. They did not have very complex social system, just two main groups. The first group is the higher ranked of the two. Nobles, which were called pipiltin and pilli for singular usage made up the higher status people of the Aztec culture. The people in this group received a more extent education than other people in the culture. Also, these people were allowed to decorate their houses to their choosing and wear superior clothes compared to that of the average people of the town, village, or community they were living in. Nobles mostly held places in the office of government, but not all, some were craftsmen of different sorts, and a few were even the palace servants. Even if they were given a lower ranked area of work it was possible to move up to a new or more suited position just by doing a good job at what was presently assigned. Second to the Nobles were the Commoners or what were called by the Aztec; macehualli, which these were the people who worked the land of the area. Not all people worked the land, albeit some were stuck working land forever you could also move up a bit in this class with some hard work. The poor of this class could sell themselves and become a slave, eventually working off their debt. Slaves were not treated badly at all, they even had laws that firmly protected them. Commoners also included craftsmen and merchants. The merchants were given more opportunity and could travel, sell, trade, and were given more respect than most in this class. Soldiers can be included in both classes because even if they started out at a low rank they could work their way up to being a noble, and become a pilli. The classification of the Aztec culture is fairly simple. They were rich. Aztec people possessed many, many, manyimportant goods that you could not easily get around the world. Being a first world country was not exactly and easy task. Unbeknownst to them though, was that they had predators lurking in the shadows (Spaniards) that wanted their gold, cocoa beans, and much more. Their society and area was highly valued. Plus, the land they lived on was not known by many people and had not been explored. Aztec people were civilized, eminent, smart, cunning, and ethical, but their empire did fall. Not all things last forever as history shows us. Spaniards eventually came in search of new land and treasures such as gold, upon which they found the Aztec people. Invaded on November of 1519 the Aztec people welcomed the Spaniards. Cortes was a Spanish conquistador looking to conquer them. At first, the outcome looked to be in the favor of the Aztec people, but because their religion called for sacrificing hundreds to thousands of people they lost many of their own that could have been used in battle. The Spaniards brought the smallpox disease with them, which was not purposely but did favor Cortes’ side when the time came for battle. Twenty-five percent of the Aztec people died from smallpox. By 1520 the Aztec people were low on food, and still dying of the smallpox disease, eventually it claimed their emperor’s life. In 1521 Cortes finally conquered them and they surrendered. In conclusion, even though the pure Aztec race was ruined by a change in their culture from the Spaniards’ invasion there are descendants left, but with little Aztec blood in them. The legends told, pottery, huts, temples, and much more still remain in Mexico. Life in their society was very well planned and put together, yet when the Spaniards arrived that all changed. Disease, death, famine, and much more caused them to lose hold of their culture. They went from being the richest in their country to being slaves and commoners to the Spaniard conquistadores. A lot of their culture was destroyed with the invasion so most researchers have little to go on. The possibilities of how different their society would have been if the Spaniards were defeated, or had never come into contact with the Aztec people are infinite. References â€Å"Aztec Economy. † edublogs. edublog, 9 Mar. 2011. google. Web. 10 Oct. 2011. . (Aztec Economy edublog) â€Å"Aztec: Economic and Trade System. † PLU. Pacific Lutheran University, n. d. google. Web. 10 Oct. 2011. . (Pacific Lutheran University) Baquedano, Elizabeth. Aztec, Inca, and Maya. : Eyewitness Books, 1993. Baquedano) Cottrill, Jaime. Aztec-History. Ed. Jaime Cottrill. , 2006. Google. Web. 10 Oct. 2011. . (Cotrill) Outline I. Intro a. Aztec Culture b. In this research paper the plan is to inform and explain to the teacher that the Aztec were an impressive group of people for their time period because they were so advanced in science, agriculture and were far more civilized than people from ot her regions had assumed during that time period. II. Political System III. Major Contributions to Human History IV. Economy V. Social System VI. Classification VII. Reasons for Success/Destruction VIII. Conclusion How to cite Aztec Culture, Essay examples

Friday, December 6, 2019

Security Concerns Identified in the IOT-Free-Samples for Students

Question: Discuss about the Various Security Concerns Identified in the IOT. Answer: Introduction: The IoT or Internet of Things is the inter-networking of various items like buildings, vehicles, physical devices. These are embedded with network connectivity, actuators, sensors, software or electronics that enable the objects to gather and exchange information (Xu, Wendt and Potkonjak 2014). From the perspective of security the IoT has not been flawless. Various security concerns identified in the IoT are analyzed in this essay. The essay describes the reason for security issues in IoT. The various kinds of security problems are identified. Then they are described and compared. Lastly a sophisticated technique is proposed to resolve the issues. Body: The IoT security has been the sector of endeavor concerning with the safeguarding of the connected networks and devices in IoT. Every computer is hackable. This contains much to do with the market of computers as it has been doing with technologies. Everyone prefers their software to be inexpensive and full of features. This has been at the expense of reliability and security (Li and Da Xu 2017). For instance, a computer affecting the security of Facebook is notably a market failure. The industries have been filled with many market failures that have gone unnoticed till the present days. As the computers have been permeating the homes, business, cars and so on the market failures has not been tolerable no longer. The only resolution has been the regulation foisted on the people by the government desperate in doing something at the face of the disaster. The fundamental problem regarding IoT has been rising due to the concept of networking appliances and various other objects are new relatively. The security is not always included in designing products. The IoT products have been commonly sold with the unpatched and old embedded operating software and systems (Barreto et al. 2016). Moreover, the purchasers have been often failing to alter the default passwords on the smart devices. However, as they change them, they fail to select the strong passwords sufficiently. One of the common security issues for IoT security arising in the current age is regarding the hardware problems. From the very starting of the hardware of the IoT is a problem. With every sudden interest and hype in the chipmakers of IoT devices like Intel and ARM have been reinforcing their processors for further protection with every latest generation. However the realistic scene has not seemed to ever destroy the security gap. The problems have been that the modern arc hitecture of chips has been made particularly for IoT devices (Ren et al. 2014). Thus the prices have been going up and making them costly. Moreover, the complicated design has been requiring more power battery that has been an obvious challenge for the IoT applications. The IoT devices that are wearable and affordable have not been using that kind of chips. This indicates that there has been the necessity for better approach. Some of the existing approaches to resolve the security problems are explained hereby. The most effective way to minimizing the challenges of hardware security regarding IoT has been to possess he stringent framework for testing in place. For the secured testing of hardware one of the top picks are the device range. The coverage network of IoT device has been paramount. The organizations need to be much specific about the range metrics of the device or application (Mahmoud et al. 2015). For example of the Zigbee technology is used for empowering the network of the device, the repeaters are needed to be calculated. These repeaters are needed under the establishment for providing the communication range for the device. However any number of repeaters cannot be put blindly as with the rising number of repeaters the systems capacity reduces (Guo et al. 2016). Thus the testing of device range would enable to seek the sweet spot whether the range can be maximized without reaching breaking point. The next resolution is the capacity and latency. The capacity refers to the bytes per second handling speed of the network. The latency on the other hand points to the entire tike duration taken to transfer data between the endpoints of the applications. The developers have been always looking for the ways for increasing the latency and capacity of their applications of IoT for improving the performance (Hossain et al. 2016). The problem has been both the factors have been inversely proportionate and enhancing one degrades the. For this the data intensive applications and devices are to be tested thoroughly for capacity and latency balance. The next one is the manufacturability next. It has been seldom that the IoT device is built from the scratch of the individuals. Maximum time the module and components are been used that manufactured by the application. To test the modules for proper functioning has been very crucial. The manufacturers have been always doing the testing of assembl y line on their end. However that should also be verified (Gou et al. 2013). Moreover as all the modules are pit together on the board testing has been needed for making sure that there have been no errors that are introduced due to wiring and soldering. The manufacturability testing has been required for making sure that the application has been working as it has been expected to. Figure 1: The IoT security threat map (Source: Beechamresearch.com, 2017) Regarding effectiveness the IoT has been presenting huge opportunities of business for every market virtually. To resolve the problems regarding security the physical objects could be connected with the back end systems related to each other using the internet protocols. The door has to be opened for smart analytics. They must be energy efficiency, cost savings, predictive maintenance and the capability of offering more customized solutions and products effectively. As per as the cost is considered, the example of clothing manufacturing getting connected to the ordering system of customer could be considered. Rather producing loads and loads of items in set colors and sizes, the manufacturer could produce cloths on the basis of the particular details of the customer orders. This has been helping to cut the costs as they have not been producing clothes that no one have been asking for or the dead inventory (Lesjak, Hein and Winter 2015). As the customization rises the values to the cl ients and could effectively let the manufacturer increase the price points and differentiate from the competitors. The scopes could be applied to limitless other markets. The improved technique or method for defending the security issue of IoT is to implement Microsoft Azure. The Azure IoT has been supporting the latest security hardware for strengthening the IoT security. Azure IoT have been supporting DICE or Device Identity Composition Engine and various other types of HSMs or Hardware Security Modules. The DICE has been a standard at TCG or Trusted Computing Group for device attestation and identification that enable the manufactures for using silicon gates for creating device identification on the basis of making security hardware, hardware of DNA of latest devices from ground ups (Phls et al. 2014). The HSMs have been the core security technology used for identities of securing devices and delivering the advanced functionality like the device attestation based on hardware and the zero touch provisions. Moreover the Azure IoT team has been working with the standards major industry partners and organizations for employing the new in best practices in security for deploying support for a huge range of varieties of HSMs. The HSM has been offering resilient and resistant hardware basis of trust in the IoT devices. The Azure IoT transparency of platform has been integrating HSM support with the platform services such as the Azure IoT Hub Device Management and Azure IoT Hub Device Provisioning. Thus it enables the developers and customers in focusing more over recognizing particular risks regarding with the application and lesser on the tactics of security deployment. The IoT device deployment could be autonomous, remote and pen to the treats such as displacement, tampering and spoofing. In such cases the HSMs have been offering a important defense-layer for raising trust in privacy, confidentiality, integrity, authentication and many more (Halak, Zwolinski and Mispan 2016). The Azure IoT group has been grouping directly with the primary HSM manufacturers to enable easy access to a broad variety of the HSMs for accommodating risks regarding deployment specific for the developers and customers. Figure 2: Azure IoT suite (Source: Azure.microsoft.com, 2017) The effectiveness of the software lies in the fact that the Azure IoT team has been leveraging the open standards for developing the best practices for robust and secure deployments. One of those kinds of standards has been the DICE or Device Identity Composition Engine from the TCG or Trusted Computing Group that has been offering the scalable framework of security requiring minimum footprint of HSM for anchoring trust from which for building numerous security solutions such as secure, authentication and the remote attestation. The DICE has been the response to the latest reality of the constraint computing that has been consistently characterizing the IoT devices (Dofe, Frey and Yu 2016). The minimalist approach has been the alternate path towards more traditional framework standards such as the TCG or Trusted Computing Group. This has been offering a framework for scalable security that needed the minimum HSM footprint for anchoring tryst to create numerous solutions of security like remote attestation, secure boost and authentication. The DICE has been the response against the latest reality of the constraint computing continually characterizing the IoT devices. The minimalist kind of approach of it has been the alternate path for more traditional standards of security framework such as the TPM and TCG that has also supported on Azure platform IoT (Syed and Lourde 2016). The security journey has been the one, upon which the IoT team has been committed consistently helping the developers and customers to navigate in achieving the greatest confidence and trust to secure their deployments in IoT. This has involved the supporting of a broad range of security and security standards based on hardware for securing the hardware root to trust for the IoT devices. Conclusion: The security solution to use Azure IoT discussed above must be implemented strictly for assuring the proper functioning of IoT hardware with safety. The technologies of IoT have been still immature for a wide extent and little paranoid about their protection are indeed useful. Before starting with the development of any application, it is mandatory to research and aware as much as possible. There should always be the tradeoffs present and the developer should always be bewaring of the threats. The security beaches are bound to occur almost and the organizations must always be ready with the exit plan. This would help to secure maximum information during any attack. References: Azure.microsoft.com. (2017).Azure IoT Suite | Microsoft Azure. [online] Available at: https://azure.microsoft.com/en-in/suites/iot-suite/ [Accessed 5 Aug. 2017]. Barreto, L., Celesti, A., Villari, M., Fazio, M. and Puliafito, A., 2016. Security and IoT Cloud Federation: Design of Authentication Schemes. InInternet of Things. IoT Infrastructures: Second International Summit, IoT 360 2015, Rome, Italy, October 27-29, 2015. Revised Selected Papers, Part I(pp. 337-346). Springer International Publishing. Beechamresearch.com. (2017).IoT Security Threat Map :: Beecham Research. [online] Available at: https://www.beechamresearch.com/download.aspx?id=43 [Accessed 5 Aug. 2017]. Dofe, J., Frey, J. and Yu, Q., 2016, May. Hardware security assurance in emerging IoT applications. InCircuits and Systems (ISCAS), 2016 IEEE International Symposium on(pp. 2050-2053). IEEE. Gou, Q., Yan, L., Liu, Y. and Li, Y., 2013, August. Construction and strategies in IoT security system. InGreen Computing and Communications (GreenCom), 2013 IEEE and Internet of Things (iThings/CPSCom), IEEE International Conference on and IEEE Cyber, Physical and Social Computing(pp. 1129-1132). IEEE. Guo, Z., Karimian, N., Tehranipoor, M.M. and Forte, D., 2016, May. Hardware security meets biometrics for the age of iot. InCircuits and Systems (ISCAS), 2016 IEEE International Symposium on(pp. 1318-1321). IEEE. Halak, B. and Zwolinski, M., 2016. Hardware-based security solutions for the Internet of Things using physical unclonable functions. Halak, B., Zwolinski, M. and Mispan, M.S., 2016, October. Overview of PUF-based hardware security solutions for the internet of things. InCircuits and Systems (MWSCAS), 2016 IEEE 59th International Midwest Symposium on(pp. 1-4). IEEE. Hossain, M.S., Muhammad, G., Rahman, S.M.M., Abdul, W., Alelaiwi, A. and Alamri, A., 2016. Toward end-to-end biomet rics-based security for IoT infrastructure.IEEE Wireless Communications,23(5), pp.44-51. Lesjak, C., Hein, D. and Winter, J., 2015, November. Hardware-security technologies for industrial IoT: TrustZone and security controller. InIndustrial Electronics Society, IECON 2015-41st Annual Conference of the IEEE(pp. 002589-002595). IEEE. Li, S. and Da Xu, L., 2017.Securing the Internet of Things. Syngress. Mahmoud, R., Yousuf, T., Aloul, F. and Zualkernan, I., 2015, December. Internet of things (iot) security: Current status, challenges and prospective measures. InInternet Technology and Secured Transactions (ICITST), 2015 10th International Conference for(pp. 336-341). IEEE. Phls, H.C., Angelakis, V., Suppan, S., Fischer, K., Oikonomou, G., Tragos, E.Z., Rodriguez, R.D. and Mouroutis, T., 2014, April. RERUM: Building a reliable IoT upon privacy-and security-enabled smart objects. InWireless Communications and Networking Conference Workshops (WCNCW), 2014 IEEE(pp. 122-127). IEEE. Ren, K., Samarati, P., Gruteser, M., Ning, P. and Liu, Y., 2014. Guest Editorial Special Issue on Security for IoT: The State of the Art.IEEE Internet of Things Journal,1(5), pp.369-371. Syed, A. and Lourde, R.M., 2016, December. Hardware Security Threats to DSP Applications in an IoT Network. InNanoelectronic and Information Systems (iNIS), 2016 IEEE International Symposium on(pp. 62-66). IEEE. Xu, T., Wendt, J.B. and Potkonjak, M., 2014, November. Security of IoT systems: Design challenges and opportunities. InProceedings of the 2014 IEEE/ACM International Conference on Computer-Aided Design(pp. 417-423). IEEE Press.